top of page

Epoxy

EpoxyAll 100

A two-component low viscosity 100% solids epoxy resin that designed to be used in a wide range of flooring systems. EpoxyAll 100 has been uniquely formulated to be used as a primer, binder resin, or finish coat.

MVT 110

A two-component low viscosity 100% solids epoxy resin that is designed to be used on concrete surfaces where moisture transmission is a problem. MVT 110 is formulated with low viscosity and excellent substrate wetting capabilities to promote penetration and adhesion.

EpoxyAll 100 UV

A two-component low viscosity 100% solids epoxy resin that designed to be used in a wide range of flooring systems. EpoxyAll 100 UV has been uniquely formulated to be used as a primer, binder resin, or finish coat while offering UV protection.

Water-Based 120

A two-component water-based epoxy system. This material cures blush free over a wide range of temperatures and adheres to numerous substrates including flake floors, quartz and overlays.

BDC 3100

BDC 3100 is a two component, 100% solids, high-build, low viscosity, low odor, cyclo-aliphatic, chemical resistant epoxy. In combination with color quartz or paint chips it can be used to create a decorative floor coating.Check the 

Polyurethane

Water-Based 320

Our water-based premium UV resistant two-component, low viscosity, clear water based urethane coating is designed to be used in a wide range of flooring systems where scratch and abrasion resistance, hot tire pick up and chemical resistance is desired.

BDC 9520

A two-component, high-solids, solvenated, aliphatic polyester polyurethane. Its UV resistant, mar resistant, and chemical resistant nature of this product will cause it to outperform most other types of sealers or topcoats when compared.

Polyaspartic

BDC 9750

BDC 9750 is a 4 Hour Dry, two component, high-solids, polyaspartic. The 9750’s extra working time, coupled with its UV resistance, mar resistance, and chemical resistance will outperform most other types of sealers or topcoats.

Urethane Hybrids

PolyAll 250

A two-component, low viscosity solvent-based urethane sealer. It is used as a primer/sealer over a variety of surfaces.

B-Tuff 5600

A high solids, low odor, low VOC waterproofing membrane system that consists of a two-component fast cure, urethane/polyurea basecoat.

B-Tuff 308

A two-component, fast setting, rapid curing, solvent free, flexible, high performance, high solids, urethane-elastomer base membrane that can be applied to prepared interior or exterior concrete, plywood and metal surfaces. 

bottom of page